ATR command when programming PC/SC reader

smartcard nfc smartcard-reader mifare pcsc
STeN picture STeN · Jun 9, 2011 · Viewed 17.7k times · Source

I have checked the programming interface for the MIFARE Ultralight and TOPAZ/Jewel IC tags. The API quite nicely describes how the bytes are saved on the card, how to address the memory blocks, how to make all operations like read, read-all, use of the OTP (One Time Programmable) function, how to read ROM bytes, how to switch from idle to ready state (REQA, WUPA commands), it says if commands are CRC protected, how to access the tag UID, etc.

When stared to program the NFC reader (ACR122U or SCL010) I found that all communication between PCD (reader) an PICC (tag) starts with the ATR (Answer-To-Reset) command, which is as described on Internet a command that the PCD sends to PICC for identification purposes.

But none of the tags documentation mentions the ATR command – all communication with tags when they become powered (PQR) starts with REQA, WUPA commands in order to switch the card to the Ready mode.

My understanding is that ATR is built by PC/SC based on the NFC card the reader communicated with. Once the reader detect what type of technology is the tag based on it creates the ATR. Also according to documentation ATR for different NFC readers are different for the same NFC tags.

Am I right? Does the PC/SC build the ATR?

BR STeN

Answer

notsiddhartha picture notsiddhartha · Jun 23, 2011

Short answer:

  • You are correct about ATR being generated by PCSC reader
  • I think the ATR will remain the same irrespective of the reader for contactless cards

Long answer:

ATR is for contact cards and is specified in ISO 7816. For contacless cards, it is the PC/SC reader (IFD) that generates the ATR.

The ATR is constructed based on:

  • ATS (Answer to Select) for ISO 14443 Type A cards
  • ATQB and ATTRIB bytes for ISO 14443 Type B cards

The ATR will be of the form 3B 8X 80 01 HB_ATS Parity_Byte where X is the number of bytes of Historical Bytes of ATS (HB_ATS).

The exact construction of ATR for contactless cards is given in section 3.1.3.2.3 of the PC/SC spec.

Given that the only variable is ATS, it should be the same regardless of the reader.

--Sid

Related questions

NFC card emulation Android

the Nexus S device NXP PN544 NFC controller supports not only SWP for UICC based SE, but also the S2C (aka NFC-WI) for the external, e.g. micro SD card SE. Does anybody know how this can be enabled …

Read More
How to change the Mifare Classic 1k key A and Key B

I am using a Mifare classic 1k reader, and it comes with the default key A and B which is: FFFFFFFFFFFF Using the Key A to read and write works. but I want to change the keys. Is there anyway …

Read More
Is Apple Watch detected by an RFID reader?

I'm new to NFC technology. Apple hasn't yet opened NFC for developers. Does this mean that 3rd party application can't write data or trigger an action on the device? But is it possible to identify the watch using an RFID …

Read More