Following an example on resetting a serial port in Linux I wanted to translate the following snippet
fd = open(filename, O_WRONLY);
ioctl(fd, USBDEVFS_RESET, 0);
close(fd);
into valid python code. Here is what I have tried so far
file_handler = open(self._port, 'w')
fcntl.ioctl(file_handler, termios.USBDEVFS_RESET)
file_handler.close()
which ends with an error 'module' object has no attribute 'USBDEVFS_RESET'
. The termios documentation is not very helpful in this point, as it does not list the possible properties of termios
. See also the fcntl documentation for an example of such a termios
property.
How to I 'convert' the C code to python2.7 code correctly?
I came across this when looking how to do a USBDEVFS_RESET and thought I'd share what I found about _IO: https://web.archive.org/web/20140430084413/http://bugcommunity.com/wiki/index.php/Develop_with_Python#Introduction_to_ioctl_calls_in_python
So, what I have so far is the following:
from fcntl import ioctl
busnum = 1
devnum = 10
filename = "/dev/bus/usb/{:03d}/{:03d}".format(busnum, devnum)
#define USBDEVFS_RESET _IO('U', 20)
USBDEVFS_RESET = ord('U') << (4*2) | 20
fd = open(filename, "wb")
ioctl(fd, USBDEVFS_RESET, 0)
fd.close()
You can get the busnum
and devnum
from lsusb
.
EDIT: above link was dead, URL was replaced to the last archived version.