Sending DHCP Discover using python scapy

Question

I am new to python and learning some network programming, I wish to send an DHCP Packet through my tap interface to my DHCP server and expecting some response from it. I tried with several packet building techniques such a structs and ctypes and ended up with using scapy. Here I am able to send DHCP Packet but unable to get any response from the DHCP server(Analyzed using wireshark and tcpdump)..My packet looked like same as original DHCP packet but failed to get response. Here is my code

import socket
from scapy.all import *

def main():

 if len(sys.argv)<3:
   print " fewer arguments."
   sys.exit(1)
 else:
   tap_interface = sys.argv[1]
   src_mac_address = sys.argv[2]

 ethernet = Ether(dst='ff:ff:ff:ff:ff:ff',src=src_mac_address,type=0x800)
 ip = IP(src ='0.0.0.0',dst='255.255.255.255')
 udp =UDP (sport=68,dport=67)
 fam,hw = get_if_raw_hwaddr(tap_interface)
 bootp = BOOTP(chaddr = hw, ciaddr = '0.0.0.0',xid =  0x01020304,flags= 1)
 dhcp = DHCP(options=[("message-type","discover"),"end"])
 packet = ethernet / ip / udp / bootp / dhcp

 fd = open('/dev/net/tun','r+')
 TUNSETIFF = 0x400454ca
 IFF_TAP = 0x0002
 IFF_NO_PI = 0x1000
 mode = IFF_TAP | IFF_NO_PI
 ifr = struct.pack('16sH', tap_interface, IFF_TAP | IFF_NO_PI)
 fcntl.ioctl(fd,TUNSETIFF,ifr)


 while True:
    sendp(packet, iface = tap_interface)
    time.sleep(10)


 if __name__ == '__main__':
     main()

Is there any other ways of achieving this? If so please do mention them as well. Thanks in Advance.

Answer 1

Solved ! I had the same problem,

The problem I think was on the srp() function, it can't receive packets on port 68, but I've created a new function with a new thread that sniffs BOOTP messages and displays the packet fields. you can simulate it :

sniff(iface=myiface, filter="port 68 and port 67")

then send the packet using srp() or sendp() func :)

NOTE: I have used multithreading mechanism cause my program sends messages and sniffs if a rogue DHCP Server is on the network