Rotate line around center point given two vertices

Question

I've been trying to rotate a bunch of lines by 90 degrees (that together form a polyline). Each line contains two vertices, say (x1, y1) and (x2, y2). What I'm currently trying to do is rotate around the center point of the line, given center points |x1 - x2| and |y1 - y2|. For some reason (I'm not very mathematically savvy) I can't get the lines to rotate correctly.

Could someone verify that the math here is correct? I'm thinking that it could be correct, however, when I set the line's vertices to the new rotated vertices, the next line may not be grabbing the new (x2, y2) vertex from the previous line, causing the lines to rotate incorrectly.

Here's what I've written:

def rotate_lines(self, deg=-90):
    # Convert from degrees to radians
    theta = math.radians(deg)

    for pl in self.polylines:
        self.curr_pl = pl
        for line in pl.lines:
            # Get the vertices of the line
            # (px, py) = first vertex
            # (ox, oy) = second vertex
            px, ox = line.get_xdata()
            py, oy = line.get_ydata()

            # Get the center of the line
            cx = math.fabs(px-ox)
            cy = math.fabs(py-oy)

            # Rotate line around center point
            p1x = cx - ((px-cx) * math.cos(theta)) - ((py-cy) * math.sin(theta))
            p1y = cy - ((px-cx) * math.sin(theta)) + ((py-cy) * math.cos(theta))

            p2x = cx - ((ox-cx) * math.cos(theta)) - ((oy-cy) * math.sin(theta))
            p2y = cy - ((ox-cx) * math.sin(theta)) + ((oy-cy) * math.cos(theta))

            self.curr_pl.set_line(line, [p1x, p2x], [p1y, p2y])

Answer 1

The coordinates of the center point (cx,cy) of a line segment between points (x1,y1) and (x2,y2) are:

    cx = (x1 + x2) / 2
    cy = (y1 + y2) / 2

In other words it's just the average, or arithmetic mean, of the two pairs of x and y coordinate values.

For a multi-segmented line, or polyline, its logical center point's x and y coordinates are just the corresponding average of x and y values of all the points. An average is just the sum of the values divided by the number of them.

The general formulas to rotate a 2D point (x,y) θ radians around the origin (0,0) are:

    x′ = x * cos(θ) - y * sin(θ)
    y′ = x * sin(θ) + y * cos(θ)

To perform a rotation about a different center (cx, cy), the x and y values of the point need to be adjusted by first subtracting the coordinate of the desired center of rotation from the point's coordinate, which has the effect of moving (known in geometry as translating) it is expressed mathematically like this:

    tx = x - cx
    ty = y - cy

then rotating this intermediate point by the angle desired, and finally adding the x and y values of the point of rotation back to the x and y of each coordinate. In geometric terms, it's the following sequence of operations:  Tʀᴀɴsʟᴀᴛᴇ ─► Rᴏᴛᴀᴛᴇ ─► Uɴᴛʀᴀɴsʟᴀᴛᴇ.

This concept can be extended to allow rotating a whole polyline about any arbitrary point—such as its own logical center—by just applying the math described to each point of each line segment within it.

To simplify implementation of this computation, the numerical result of all three sets of calculations can be combined and expressed with a pair of mathematical formulas which perform them all simultaneously. So a new point (x′,y′) can be obtained by rotating an existing point (x,y), θ radians around the point (cx, cy) by using:

    x′ = (  (x - cx) * cos(θ) + (y - cy) * sin(θ) ) + cx
    y′ = ( -(x - cx) * sin(θ) + (y - cy) * cos(θ) ) + cy

Incorporating this mathematical/geometrical concept into your function produces the following:

from math import sin, cos, radians

def rotate_lines(self, deg=-90):
    """ Rotate self.polylines the given angle about their centers. """
    theta = radians(deg)  # Convert angle from degrees to radians
    cosang, sinang = cos(theta), sin(theta)

    for pl in self.polylines:
        # Find logical center (avg x and avg y) of entire polyline
        n = len(pl.lines)*2  # Total number of points in polyline
        cx = sum(sum(line.get_xdata()) for line in pl.lines) / n
        cy = sum(sum(line.get_ydata()) for line in pl.lines) / n

        for line in pl.lines:
            # Retrieve vertices of the line
            x1, x2 = line.get_xdata()
            y1, y2 = line.get_ydata()

            # Rotate each around whole polyline's center point
            tx1, ty1 = x1-cx, y1-cy
            p1x = ( tx1*cosang + ty1*sinang) + cx
            p1y = (-tx1*sinang + ty1*cosang) + cy
            tx2, ty2 = x2-cx, y2-cy
            p2x = ( tx2*cosang + ty2*sinang) + cx
            p2y = (-tx2*sinang + ty2*cosang) + cy

            # Replace vertices with updated values
            pl.set_line(line, [p1x, p2x], [p1y, p2y])