Daemonizing a python script in debian
I have a python script that i want to run in the background on startup. This is the script:
#!/usr/bin/python
from Adafruit_CharLCD import Adafruit_CharLCD
from subprocess import *
from time import sleep, strftime
from datetime import datetime
from datetime import timedelta
from os import system
from os import getloadavg
from glob import glob
#Variables
lcd = Adafruit_CharLCD() #Stores LCD object
cmdIP = "ip addr show eth0 | grep inet | awk '{print $2}' | cut -d/ -f1" #Current IP
cmdHD = "df -h / | awk '{print $5}'" # Available hd space
cmdSD = "df -h /dev/sda1 | awk '{print $5}'" # Available sd space
cmdRam = "free -h"
temp = 0
#Run shell command
def run_cmd(cmd):
p = Popen(cmd, shell=True, stdout=PIPE)
output = p.communicate()[0]
return output
#Initalises temp device
def initialise_temp():
#Initialise
system("sudo modprobe w1-gpio")
system("sudo modprobe w1-therm")
#Find device
devicedir = glob("/sys/bus/w1/devices/28-*")
device = devicedir[0]+"/w1_slave"
return device
#Gets temp
def get_temp(device):
f = open (device, 'r')
sensor = f.readlines()
f.close()
#parse results from the file
crc=sensor[0].split()[-1]
temp=float(sensor[1].split()[-1].strip('t='))
temp_C=(temp/1000.000)
temp_F = ( temp_C * 9.0 / 5.0 ) + 32
#output
return temp_C
#Gets time
def get_time():
return datetime.now().strftime('%b %d %H:%M:%S\n')
#Gets uptime
def get_uptime():
with open('/proc/uptime', 'r') as f:
seconds = float(f.readline().split()[0])
array = str(timedelta(seconds = seconds)).split('.')
string = array[0].split(' ')
totalString = string[0] + ":" + string[2]
return totalString
#Gets average load
def get_load():
array = getloadavg()
average = 0
for i in array:
average += i
average = average / 3
average = average * 100
average = "%.2f" % average
return str(average + "%")
#def get_ram():
def get_ram():
ram = run_cmd(cmdRam)
strippedRam = ram.replace("\n"," ");
splitRam = strippedRam.split(' ')
totalRam = int(splitRam[52].rstrip("M"))
usedRam = int(splitRam[59].rstrip("M"))
percentage = "%.2f" % ((float(usedRam) / float(totalRam)) * 100)
return percentage + "%"
#Gets the SD usage
def get_sd():
sd = run_cmd(cmdSD)
strippedSD = sd.lstrip("Use%\n")
return strippedSD
#Gets the HD usage
def get_hd():
hd = run_cmd(cmdSD)
strippedHD = hd.lstrip("Use%\n")
return strippedHD
def scroll():
while(1):
lcd.scrollDisplayLeft()
sleep(0.5)
#Uptime and IP
def screen1():
uptime = get_uptime()
lcd.message('Uptime %s\n' % (uptime))
ipaddr = run_cmd(cmdIP)
lcd.message('IP %s' % (ipaddr))
#Ram and load
def screen2():
ram = get_ram()
lcd.message('Ram Used %s\n' % (ram))
load = get_load()
lcd.message('Avg Load %s' % (load))
#Temp and time
def screen3():
time = get_time();
lcd.message('%s\n' % (time))
lcd.message('Temp %s' % (temp))
#HD and SD usage
def screen4():
sd = get_sd()
lcd.message('SD Used %s\n' % (sd))
hd = get_hd()
lcd.message('HD Used %s' % (hd))
#Pause and clear
def screenPause(time):
sleep(time)
#In here to reduce lag
global temp
temp = str(get_temp(device));
lcd.clear()
###########################################################################################################
#Initialise
lcd.begin(16,2)
device = initialise_temp()
lcd.clear()
#Testing
#Main loop
while(1):
screen1()
screenPause(5)
screen2()
screenPause(5)
screen3()
screenPause(5)
screen4()
screenPause(5)
I know i probably havnt done things the write way but its the first attempt. My startup script is in /etc/init.d This is the script:
#! /bin/sh
### BEGIN INIT INFO
# Provides: LCD looping
# Required-Start: $remote_fs $syslog
# Required-Stop: $remote_fs $syslog
# Default-Start: 2 3 4 5
# Default-Stop: 0 1 6
# Short-Description: LCD daemon
# Description: This file should be used to construct scripts to be
# placed in /etc/init.d.
### END INIT INFO
# Author: Foo Bar <[email protected]>
#
# Please remove the "Author" lines above and replace them
# with your own name if you copy and modify this script.
# Do NOT "set -e"
# PATH should only include /usr/* if it runs after the mountnfs.sh script
PATH=/sbin:/usr/sbin:/bin:/usr/bin
DESC="Loops the LCD screen through LCD.py"
NAME=startup.py
DAEMON=/home/pi/Programming/LCD/startup.py
DAEMON_ARGS=""
PIDFILE=/var/run/daemonLCD.pid
SCRIPTNAME=/etc/init.d/daemonLCD
# Exit if the package is not installed
[ -x "$DAEMON" ] || exit 0
# Read configuration variable file if it is present
[ -r /etc/default/daemonLCD ] && . /etc/default/daemonLCD
# Load the VERBOSE setting and other rcS variables
. /lib/init/vars.sh
# Define LSB log_* functions.
# Depend on lsb-base (>= 3.2-14) to ensure that this file is present
# and status_of_proc is working.
. /lib/lsb/init-functions
#
# Function that starts the daemon/service
#
do_start()
{
# Return
# 0 if daemon has been started
# 1 if daemon was already running
# 2 if daemon could not be started
start-stop-daemon --start --quiet --pidfile $PIDFILE --exec $DAEMON --test > /dev/null \
|| return 1
start-stop-daemon --start --quiet --pidfile $PIDFILE --exec $DAEMON -- \
$DAEMON_ARGS \
|| return 2
# Add code here, if necessary, that waits for the process to be ready
# to handle requests from services started subsequently which depend
# on this one. As a last resort, sleep for some time.
}
#
# Function that stops the daemon/service
#
do_stop()
{
# Return
# 0 if daemon has been stopped
# 1 if daemon was already stopped
# 2 if daemon could not be stopped
# other if a failure occurred
start-stop-daemon --stop --quiet --retry=TERM/30/KILL/5 --pidfile $PIDFILE --name $NAME
RETVAL="$?"
[ "$RETVAL" = 2 ] && return 2
# Wait for children to finish too if this is a daemon that forks
# and if the daemon is only ever run from this initscript.
# If the above conditions are not satisfied then add some other code
# that waits for the process to drop all resources that could be
# needed by services started subsequently. A last resort is to
# sleep for some time.
start-stop-daemon --stop --quiet --oknodo --retry=0/30/KILL/5 --exec $DAEMON
[ "$?" = 2 ] && return 2
# Many daemons don't delete their pidfiles when they exit.
rm -f $PIDFILE
return "$RETVAL"
#
# Function that sends a SIGHUP to the daemon/service
#
do_reload() {
#
# If the daemon can reload its configuration without
# restarting (for example, when it is sent a SIGHUP),
# then implement that here.
#
start-stop-daemon --stop --signal 1 --quiet --pidfile $PIDFILE --name $NAME
return 0
}
case "$1" in
start)
[ "$VERBOSE" != no ] && log_daemon_msg "Starting $DESC" "$NAME"
do_start
case "$?" in
0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;;
2) [ "$VERBOSE" != no ] && log_end_msg 1 ;;
esac
;;
stop)
[ "$VERBOSE" != no ] && log_daemon_msg "Stopping $DESC" "$NAME"
do_stop
case "$?" in
0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;;
2) [ "$VERBOSE" != no ] && log_end_msg 1 ;;
esac
;;
status)
status_of_proc "$DAEMON" "$NAME" && exit 0 || exit $?
;;
#reload|force-reload)
#
# If do_reload() is not implemented then leave this commented out
# and leave 'force-reload' as an alias for 'restart'.
#
#log_daemon_msg "Reloading $DESC" "$NAME"
#do_reload
#log_end_msg $?
#;;
restart|force-reload)
#
# If the "reload" option is implemented then remove the
# 'force-reload' alias
#
log_daemon_msg "Restarting $DESC" "$NAME"
do_stop
case "$?" in
0|1)
do_start
case "$?" in
0) log_end_msg 0 ;;
1) log_end_msg 1 ;; # Old process is still running
*) log_end_msg 1 ;; # Failed to start
esac
;;
*)
# Failed to stop
log_end_msg 1
;;
esac
;;
*)
#echo "Usage: $SCRIPTNAME {start|stop|restart|reload|force-reload}" >&2
echo "Usage: $SCRIPTNAME {start|stop|status|restart|force-reload}" >&2
exit 3
;;
esac
:
Im think i have missed something as when i type daemonLCD start it says command not found. Any input would be great.
Thanks
Answer
Assuming you may want to manage more than one daemon in the future, let me recommend Supervisord. It's much simpler than writing and managing your own init.d scripts.
For example, starting your script would be as easy as including this in the conf:
[program:myscript]
command=/usr/bin/python /path/to/myscript.py
I use an init.d script available here. Rename it to supervisord and copy it to your /etc/init.d/ then run:
sudo update-rc.d supervisord defaults
I believe that init script has supervisord run as root as default. You can have it drop to run as another user if you like. I'm not if children run as root or not, although I'd assume not. Go ahead and check, but if they don't you can stick a sudo before the python command in your supervisord.conf where you call the script.
It that doesn't run, (or if you want supervisord to run as a non-root but still want your script run as root) you can allow for anyone (or a group of users) to run the python script as root (although you should make quite certain that this script cannot be edited by anyone other than root).
edit your sudoers file with "sudo visudo" and add the following to the end:
USERS ALL=(ALL) NOPASSWD: /path/to/myscript.py
Then make sure you have a shebang at the beginning of your python script and change the command to omit the python call, i.e:
[program:myscript]
command=sudo /path/to/myscript.py