How to increase Redis performance when 100% CPU? Sharding? Fastest .Net Client?
Due to massive load increases on our website redis is now struggling with peak load because the redis server instance is reaching 100% CPU (on one of eight cores) resulting in time outs.
We've updated our client software to ServiceStack V3 (coming from BookSleeve 1.1.0.4) and upgraded the redis server to 2.8.11 (coming from 2.4.x). I chose ServiceStack due to the existence of the Harbour.RedisSessionStateStore that uses ServiceStack.Redis. We used AngiesList.Redis before together with BookSleeve, but we experienced 100% with that too.
We have eight redis servers configured as a master/slave tree. One single server for session state tho. The others are for data cache. One master with two master/slaves connected to two slaves each.
The servers hold about 600 client connections at peak when they start to get clogged at 100% CPU.
What can we do to increase performance?
Sharding and/or StackExchange Redis client (no session state client available to my knowledge...).
Or could it be something else? The session server also hits 100% and it is not connected to any other servers (data and network throughput are low).
Update 1: Analysis of redis-cli INFO
Here's the output of the INFO command after one night of running Redis 2.8.
# Server
redis_version:2.8.11
redis_git_sha1:00000000
redis_git_dirty:0
redis_build_id:7a57b118eb75b37f
redis_mode:standalone
os:Linux 2.6.32-431.11.2.el6.x86_64 x86_64
arch_bits:64
multiplexing_api:epoll
gcc_version:4.4.7
process_id:5843
run_id:d5bb838857d61a9673e36e5bf608fad5a588ac5c
tcp_port:6379
uptime_in_seconds:152778
uptime_in_days:1
hz:10
lru_clock:10765770
config_file:/etc/redis/6379.conf
# Clients
connected_clients:299
client_longest_output_list:0
client_biggest_input_buf:0
blocked_clients:0
# Memory
used_memory:80266784
used_memory_human:76.55M
used_memory_rss:80719872
used_memory_peak:1079667208
used_memory_peak_human:1.01G
used_memory_lua:33792
mem_fragmentation_ratio:1.01
mem_allocator:jemalloc-3.2.0
# Persistence
loading:0
rdb_changes_since_last_save:70245
rdb_bgsave_in_progress:0
rdb_last_save_time:1403274022
rdb_last_bgsave_status:ok
rdb_last_bgsave_time_sec:0
rdb_current_bgsave_time_sec:-1
aof_enabled:0
aof_rewrite_in_progress:0
aof_rewrite_scheduled:0
aof_last_rewrite_time_sec:-1
aof_current_rewrite_time_sec:-1
aof_last_bgrewrite_status:ok
aof_last_write_status:ok
# Stats
total_connections_received:3375
total_commands_processed:30975281
instantaneous_ops_per_sec:163
rejected_connections:0
sync_full:10
sync_partial_ok:0
sync_partial_err:5
expired_keys:8059370
evicted_keys:0
keyspace_hits:97513
keyspace_misses:46044
pubsub_channels:2
pubsub_patterns:0
latest_fork_usec:22040
# Replication
role:master
connected_slaves:2
slave0:ip=xxx.xxx.xxx.xxx,port=6379,state=online,offset=272643782764,lag=1
slave1:ip=xxx.xxx.xxx.xxx,port=6379,state=online,offset=272643784216,lag=1
master_repl_offset:272643811961
repl_backlog_active:1
repl_backlog_size:1048576
repl_backlog_first_byte_offset:272642763386
repl_backlog_histlen:1048576
# CPU
used_cpu_sys:20774.19
used_cpu_user:2458.50
used_cpu_sys_children:304.17
used_cpu_user_children:1446.23
# Keyspace
db0:keys=77863,expires=77863,avg_ttl=3181732
db6:keys=11855,expires=11855,avg_ttl=3126767
Update 2: twemproxy (Sharding)
I've discovered an interesting component called twemproxy. This component, as I understand it, could Shard across multiple redis instances.
Would this help relieve the CPU?
It would save us a lot of programming time, but it would still take some effort to configure 3 extra instances on each server. So I'm hoping somebody can confirm or debunk this solution before we put in the work.
Answer
My first, simple suggestion if you haven't done it already would be to turn off all RDB or AOF backups on your Master at the very least. Of course then your slaves might fall behind if they're still saving to disk. See this for an idea of the cost of RDB dumps
Another thing to do is to make sure you're pipelining all of your commands. If you're sending many commands individually that can be grouped into a pipeline you should see a bump in performance.
Also, this SO post has a good answer about profiling Redis
More info about your use case, and data structure would be helpful in deciding whether there's a simple change you could make to the way you're actually using Redis that would give you an improvement.
Edit: In response to your latest comment, it's good to note that every time you have a slave lose connection and reconnect, it will re-sync with the master. In previous versions of Redis this was always a complete re-sync, so it was quite expensive. Apparently in 2.8 the slave is now able to request a partial re-sync of just the data it's missed since it's disconnection. I don't know much about the details, but if either your master or any of your slaves aren't on 2.8.* and you have a shaky connection, that could really hurt your cpu performance by constantly forcing your master to re-sync the slaves. More info Here