How does Maven plugin prefix resolution work? Why is it resolving "findbugs" but not "jetty"?

java maven maven-metadata
Jachk E picture Jachk E · Oct 23, 2016 · Viewed 57.7k times · Source

I was doing some testing using Maven and realized that I can execute the findbugs goal of the Findbugs plugin without adding the plugin to the POM file. On the other hand, when I needed to run the run goal of the Jetty plugin, I was forced to add the plugin to the POM file or the build failed.

  • Why Jetty needed configuration in the POM while Findbugs didn't?
  • How does Maven know which Findbugs to execute (suppose we have to plugins with the same name but different group id)?

When I run the first command the build is successful without any changes in POM file:

mvn findbugs:findbugs
[INFO] Scanning for projects...
[INFO]                                                                         
[INFO] ------------------------------------------------------------------------
[INFO] Building module-mytest 1.0
[INFO] ------------------------------------------------------------------------
[INFO] 
[INFO] --- findbugs-maven-plugin:3.0.4:findbugs (default-cli) @ module-mytest ---
[INFO] Fork Value is true
     [java] Warnings generated: 6
[INFO] Done FindBugs Analysis....
[INFO] ------------------------------------------------------------------------
[INFO] BUILD SUCCESS
[INFO] ------------------------------------------------------------------------
[INFO] Total time: 24.165s
[INFO] Finished at: Sun Oct 23 18:40:26 WEST 2016
[INFO] Final Memory: 21M/111M
[INFO] -----------------------------------------------------------------------

But when I run the second I get this:

mvn jetty:run
[INFO] Scanning for projects...
Downloading: http://repo.maven.apache.org/maven2/org/codehaus/mojo/maven-metadata.xml
Downloading: http://repo.maven.apache.org/maven2/org/apache/maven/plugins/maven-metadata.xml
Downloaded: http://repo.maven.apache.org/maven2/org/apache/maven/plugins/maven-metadata.xml (13 KB at 30.0 KB/sec)
Downloaded: http://repo.maven.apache.org/maven2/org/codehaus/mojo/maven-metadata.xml (20 KB at 41.0 KB/sec)
[INFO] ------------------------------------------------------------------------
[INFO] BUILD FAILURE
[INFO] ------------------------------------------------------------------------
[INFO] Total time: 1.129s
[INFO] Finished at: Sun Oct 23 18:43:27 WEST 2016
[INFO] Final Memory: 12M/104M
[INFO] ------------------------------------------------------------------------
[ERROR] No plugin found for prefix 'jetty' in the current project and in the plugin groups [org.apache.maven.plugins, org.codehaus.mojo] available from the repositories [local (/home/hp-pc/.m2/repository), central (http://repo.maven.apache.org/maven2)] -> [Help 1]
[ERROR] 
[ERROR] To see the full stack trace of the errors, re-run Maven with the -e switch.
[ERROR] Re-run Maven using the -X switch to enable full debug logging.
[ERROR] 
[ERROR] For more information about the errors and possible solutions, please read the following articles:
[ERROR] [Help 1] http://cwiki.apache.org/confluence/display/MAVEN/NoPluginFoundForPrefixException

So in order to pass the build I needed to add the following to the pom file:

<plugin>
  <groupId>org.eclipse.jetty</groupId>
  <artifactId>jetty-maven-plugin</artifactId>
  <version>9.2.11.v20150529</version>
</plugin>

Answer

Tunaki picture Tunaki · Oct 23, 2016

What is a prefix and why do we need it?

You just encountered the Plugin Prefix Resolution of Maven. This is a feature which enables the user to invoke goals of a specific Maven plugin, by using its prefix. When you invoke directly a goal on the command-line, you could use the fully-featured form of:

mvn my.plugin.groupId:foo-maven-plugin:1.0.0:bar

This would invoke the goal bar of the Foo Maven plugin having the coordinates my.plugin.groupId:foo-maven-plugin:1.0.0 (in the form of groupId:artifactId:version). It works well, but it is a bit verbose. It would be nice to invoke this goal in a simpler manner, without specifying all those coordinates. Maven makes this possible by assigning prefixes to plugins, so that you can refer to this prefix instead of the whole coordinates, with:

mvn foo:bar
    ^^^ ^^^
     |    |
   prefix |
          |
         goal

How is this prefix determined?

You can define a prefix for each Maven plugin. This corresponds to a simple name used to identify it:

The conventional artifact ID formats to use are:

  • maven-${prefix}-plugin - for official plugins maintained by the Apache Maven team itself (you must not use this naming pattern for your plugin, see this note for more informations)
  • ${prefix}-maven-plugin - for plugins from other sources

If your plugin's artifactId fits this pattern, Maven will automatically map your plugin to the correct prefix in the metadata stored within your plugin's groupId path on the repository.

Put another way, if your plugin's artifact id is named foo-maven-plugin, Maven will automatically assign it a prefix of foo. If you don't want this default assignment, you can still configure your own with the help of the maven-plugin-plugin and its goalPrefix parameter.

How does Maven map prefixes to plugins?

In the command

mvn foo:bar

Maven must have a way to deduce that foo actually means my.plugin.groupId:foo-maven-plugin. In the settings.xml file, you can add plugin groups, in the form of:

<pluginGroups>
  <pluginGroup>org.mortbay.jetty</pluginGroup>
</pluginGroups>

What this does, is telling Maven which group id it is supposed to consider when you're using a prefix in a command. By default, and in addition to the groups specified in the settings, Maven also searches the group ids org.apache.maven.plugins and org.codehaus.mojo. It searches those default ones after the ones you configured in the settings. Therefore, with the configuration above, and a command of mvn foo:bar, Maven will look for a plugin having a prefix of foo inside the group id org.mortbay.jetty, org.apache.maven.plugins and org.codehaus.mojo.

The second step is how that search is actually performed. Maven will download metadata files (or look them into your local repository if they are already downloaded), called maven-metadata.xml, from each remote repositories at those group ids. If we take the example where the only remote repository we have is Maven Central, Maven will first download http://repo1.maven.org/maven2/org/mortbay/jetty/maven-metadata.xml, and look inside this file if we have something mapping foo. Notice how the group id was transformed into a directory structure in the remote repository. The structure of this metadata file is:

<metadata>
  <plugins>
    <plugin>
      <name>Some Awesome Maven Plugin</name>
      <prefix>somePrefix</prefix>
      <artifactId>some-maven-plugin</artifactId>
    </plugin>
  </plugins>
</metadata>

If none of the <plugin> section contain a <prefix> that is equal to the one we specified (foo), Maven will continue with the next group id, hitting http://repo1.maven.org/maven2/org/codehaus/mojo/maven-metadata.xml. Again, if none are found, Maven will finally hit http://repo1.maven.org/maven2/org/apache/maven/plugins/maven-metadata.xml (notice the Downloading: logs in your mvn jetty:run command, exactly fetching those last two files). If none are still found, there is nothing Maven can do for you anymore, and it will error:

[ERROR] No plugin found for prefix 'foo' in the current project and in the plugin groups [org.mortbay.jetty, org.apache.maven.plugins, org.codehaus.mojo] available from the repositories [local (.../.m2/repository), central (http://repo.maven.apache.org/maven2)] -> [Help 1]

This is the error you have here. However, if one match was made during this search, then Maven can deduce the <artifactId> to use.

It now means it has the group id, and the artifact id. The final piece of the puzzle is the version

Which version is going to be used?

Maven will take the latest one available, unless explicitly configured in the POM (see next section). All possible versions are retrieved by fetching another metadata file, still called maven-metadata.xml, but this time living alongside the artifact id folder in the repository (contrary to the ones above, where it was alongside the group id). Taking the example of the Maven Clean plugin (whose group id and artifact id would be found with the above mechanism and a command of mvn clean:clean), the maven-metadata.xml looks like:

<metadata>
  <groupId>org.apache.maven.plugins</groupId>
  <artifactId>maven-clean-plugin</artifactId>
  <versioning>
    <latest>3.0.0</latest>
    <release>3.0.0</release>
    <versions>
      <version>2.0-beta-1</version>
      <version>2.0-rc1</version>
      <version>2.0</version>
      <version>2.1</version>
      <!-- more versions -->
      <version>3.0.0</version>
    </versions>
    <lastUpdated>20151022205339</lastUpdated>
  </versioning>
</metadata>

Maven will select as version the <release> version, which represents the latest release version of the plugin. If that tag isn't there, it will select <latest> which represent the latest version of the plugin, release or snapshot. It can happen that both tags are not there, in which case, Maven will select the first release, or the first snapshot for lack of a release, of the list of <version> elements.

If that still fails, there is nothing Maven can do for you anymore, the version couldn't be deduced and it errors. This isn't very likely to happen though. We now have gathered the group id, the artifact id, and the version; time to finally invoke the bar goal of our plugin.

What's the issue with my configuration?

As said above, Maven looks in certain pre-defined group ids inside the active remote repositories to look for matches with a given prefix. With the command

mvn findbugs:findbugs

Maven starts the search with the findbugs prefix. Since our configuration does not have any <pluginGroup> in our settings, Maven looks into org.codehaus.mojo and org.apache.maven.plugins group id for a prefix match.

And it does find one: Findbugs Maven Plugin is published under the org.codehaus.mojo group id; indeed, you can find it in the maven-metadata.xml:

<plugin>
  <name>FindBugs Maven Plugin</name>
  <prefix>findbugs</prefix>
  <artifactId>findbugs-maven-plugin</artifactId>
</plugin>

And you can also find the version that is going to be used by peeking into the maven-metadata.xml file under the findbugs-maven-plugin just deduced (3.0.4 at the time of this writing; and notice how it exactly matches the version in the mvn findbugs:findbugs logs of your question). So the resolution succeeded, and then Maven can continue to invoke the findbugs goal of this plugin.

The second example is the command

mvn jetty:run

As before, the same resolution steps happen, but, in this case, you'll find out that the prefix <jetty> does not appear in any of the maven-metadata.xml for the group ids org.codehaus.mojo and org.apache.maven.plugins. So the resolution fails, and Maven returns the error that you have.

But we've seen how to make it work! We can add a <pluginGroup> inside our settings, so that this group id can also be searched during resolution. The Jetty Maven Plugin is published under the group id org.eclipse.jetty, and if we peek into the corresponding maven-metadata.xml in Maven Central, you'll see that <prefix>jetty</prefix> is there. So the fix is simple: just define this new group id to search inside the settings:

<pluginGroups>
  <pluginGroup>org.eclipse.jetty</pluginGroup>
</pluginGroups>

Now, Maven will also look into this group id, and match the jetty prefix to the org.eclipse.jetty:jetty-maven-plugin successfully.

How can I use a specific version? Or, I don't want to modify my settings!

Of course, all of this resolution can be side-tracked if you define the plugin explicitly in your POM, which is the other solution you found:

<plugin>
  <groupId>org.eclipse.jetty</groupId>
  <artifactId>jetty-maven-plugin</artifactId>
  <version>9.2.11.v20150529</version>
</plugin>

and use

mvn jetty:run

If you configure the plugin directly in the POM, the prefix resolution still happens, but it is a bit masked: Maven will download the plugin from the configured remote repositories, and will download and install all metadata files along the way, including the maven-metadata.xml containing the mapping for the prefix jetty. So since it downloads it automatically, the search always succeeds.

Note also that since the plugin was defined in the POM, you wouldn't need any <pluginGroup> in the settings: the group id was written in the POM. Furthermore, it makes sure that the version 9.2.11.v20150529 is going to be used, instead of the latest.

Related questions

How do I tell Maven to use the latest version of a dependency?

In Maven, dependencies are usually set up like this: <dependency> <groupId>wonderful-inc</groupId> <artifactId>dream-library</artifactId> <version>1.2.3</version> </dependency> Now, if you are working …

Read More
Why is Maven downloading the maven-metadata.xml every time?

Below is the error I usually get when my internet connection is flanky when trying to build a web application with maven. My question is that, why does maven always have to download every time when the same app has …

Read More
No compiler is provided in this environment. Perhaps you are running on a JRE rather than a JDK?

I'm compiling a project in Eclipse using m2eclipse. I set the JDK path in Eclipse like this: Windows-->preferences-->installed jres--> jdk1.7.xx path But this is showing an error [ERROR] COMPILATION ERROR : [INFO] ------------------------------------------------------------- [ERROR] …

Read More