http keep-alive in the modern age
So according to the haproxy author, who knows a thing or two about http:
Keep-alive was invented to reduce CPU usage on servers when CPUs were 100 times slower. But what is not said is that persistent connections consume a lot of memory while not being usable by anybody except the client who openned them. Today in 2009, CPUs are very cheap and memory is still limited to a few gigabytes by the architecture or the price. If a site needs keep-alive, there is a real problem. Highly loaded sites often disable keep-alive to support the maximum number of simultaneous clients. The real downside of not having keep-alive is a slightly increased latency to fetch objects. Browsers double the number of concurrent connections on non-keepalive sites to compensate for this.
(from http://haproxy.1wt.eu/)
Is this in line with other peoples experience? ie without keep-alive - is the result barely noticable now? (its probably worth noting that with websockets etc - a connection is kept "open" regardless of keep-alive status anyway - for very responsive apps). Is the effect greater for people who are remote from the server - or if there are many artifacts to load from the same host when loading a page? (I would think things like CSS, images and JS are increasingly coming from cache friendly CDNs).
Thoughts?
(not sure if this is a serverfault.com thing, but I won't cross post until someone tells me to move it there).
Answer
Hey since I'm the author of this citation, I'll respond :-)
There are two big issues on large sites : concurrent connections and latency. Concurrent connection are caused by slow clients which take ages to download contents, and by idle connection states. Those idle connection states are caused by connection reuse to fetch multiple objects, known as keep-alive, which is further increased by latency. When the client is very close to the server, it can make an intensive use of the connection and ensure it is almost never idle. However when the sequence ends, nobody cares to quickly close the channel and the connection remains open and unused for a long time. That's the reason why many people suggest using a very low keep-alive timeout. On some servers like Apache, the lowest timeout you can set is one second, and it is often far too much to sustain high loads : if you have 20000 clients in front of you and they fetch on average one object every second, you'll have those 20000 connections permanently established. 20000 concurrent connections on a general purpose server like Apache is huge, will require between 32 and 64 GB of RAM depending on what modules are loaded, and you can probably not hope to go much higher even by adding RAM. In practice, for 20000 clients you may even see 40000 to 60000 concurrent connections on the server because browsers will try to set up 2 to 3 connections if they have many objects to fetch.
If you close the connection after each object, the number of concurrent connections will dramatically drop. Indeed, it will drop by a factor corresponding to the average time to download an object by the time between objects. If you need 50 ms to download an object (a miniature photo, a button, etc...), and you download on average 1 object per second as above, then you'll only have 0.05 connection per client, which is only 1000 concurrent connections for 20000 clients.
Now the time to establish new connections is going to count. Far remote clients will experience an unpleasant latency. In the past, browsers used to use large amounts of concurrent connections when keep-alive was disabled. I remember figures of 4 on MSIE and 8 on Netscape. This would really have divided the average per-object latency by that much. Now that keep-alive is present everywhere, we're not seeing that high numbers anymore, because doing so further increases the load on remote servers, and browsers take care of protecting the Internet's infrastructure.
This means that with todays browsers, it's harder to get the non-keep-alive services as much responsive as the keep-alive ones. Also, some browsers (eg: Opera) use heuristics to try to use pipelinining. Pipelining is an efficient way of using keep-alive, because it almost eliminates latency by sending multiple requests without waiting for a response. I have tried it on a page with 100 small photos, and the first access is about twice as fast as without keep-alive, but the next access is about 8 times as fast, because the responses are so small that only latency counts (only "304" responses).
I'd say that ideally we should have some tunables in the browsers to make them keep the connections alive between fetched objects, and immediately drop it when the page is complete. But we're not seeing that unfortunately.
For this reason, some sites which need to install general purpose servers such as Apache on the front side and which have to support large amounts of clients generally have to disable keep-alive. And to force browsers to increase the number of connections, they use multiple domain names so that downloads can be parallelized. It's particularly problematic on sites making intensive use of SSL because the connection setup is even higher as there is one additional round trip.
What is more commonly observed nowadays is that such sites prefer to install light frontends such as haproxy or nginx, which have no problem handling tens to hundreds of thousands of concurrent connections, they enable keep-alive on the client side, and disable it on the Apache side. On this side, the cost of establishing a connection is almost null in terms of CPU, and not noticeable at all in terms of time. That way this provides the best of both worlds : low latency due to keep-alive with very low timeouts on the client side, and low number of connections on the server side. Everyone is happy :-)
Some commercial products further improve this by reusing connections between the front load balancer and the server and multiplexing all client connections over them. When the servers are close to the LB, the gain is not much higher than previous solution, but it will often require adaptations on the application to ensure there is no risk of session crossing between users due to the unexpected sharing of a connection between multiple users. In theory this should never happen. Reality is much different :-)