Docker Bridge Conflicts with Host Network
Docker seems to be creating a bridge after a container starts running that then conflicts with my host network. This is not the default bridge docker0, but rather another bridge that is created after a container has started. I am able to configure the default bridge according to the older user guide link https://docs.docker.com/v17.09/engine/userguide/networking/default_network/custom-docker0/, however, I do not know how to configure this other bridge so it does not conflict with 172.17.
This current issue is then that my container cannot access other systems on the host network when this bridge becomes active.
Any ideas?
Version of docker:
Version 18.03.1-ce-mac65 (24312)
This is the bridge that gets created. Sometimes it is not 172.17, but sometimes it is.
br-f7b50f41d024 Link encap:Ethernet HWaddr 02:42:7D:1B:05:A3
inet addr:172.17.0.1 Bcast:172.17.255.255 Mask:255.255.0.0
Answer
When docker networks are created (e.g. using docker network create or indirectly through docker-compose) without explicitly specifying a subnet range, dockerd allocates a new /16 network, starting from 172.N.0.0/16, where N is a number that is incremented (e.g. N=17, N=18, N=19, N=20, ...). A given N is skipped if a docker network (a custom one, or the default docker bridge) already exists in the range.
You can specify explicitly a safe IP range when creating a docker bridge (i.e. one that excludes the host ips in your network) on the CLI. But usually bridge networks are created automatically by docker-compose with default blocks. To exclude these IPs reliably would require modifying every docker-compose.yaml file you encounter. It's bad practice to include host-specific things inside a compose file.
Instead, you can play with the networks that docker considers allocated, to force dockerd to "skip" subnets. I'm outlining three methods below:
Method #0 -- configure the pool of ips in the daemon config
If your docker version is recent enough (TODO check minimum version), and you have permissions to configure the docker daemon's command line arguments, you can try passing --default-address-pool ARG options to the dockerd command. Ex:
# allocate /24 subnets with the given CIDR prefix only.
# note that this prefix excludes 172.17.*
--default-address-pool base=172.24.0.0/13,size=24
You can add this setting in one of the etc files: /etc/default/docker, or in /etc/sysconfig/docker, depending on your distribution. There is also a way to set this parameter in daemon.json (see syntax)
Method #1 -- create a dummy placeholder network
You can prevent the entire 172.17.0.0/16 from being used by dockerd (in future bridge networks) by creating a very small docker network anywhere inside 172.17.0.0/16.
Find 4 consecutive IPs in 172.17.* that you know are not in use in your host network, and sacrifice them in a "tombstone" docker bridge. Below, I'm assuming the ips 172.17.253.0, 172.17.253.1, 172.17.253.2, 172.17.253.3 (i.e. 172.17.253.0/30) are unused in your host network.
docker network create --driver=bridge --subnet 172.17.253.0/30 tombstone
# created: c48327b0443dc67d1b727da3385e433fdfd8710ce1cc3afd44ed820d3ae009f5
Note the /30 suffix here, which defines a block of 4 different IPs. In theory, the smallest valid network subnet should be a /31 which consists of a total of 2 IPs (network identifier + broadcast). Docker asks for a /30 minimum, probably to account for a gateway host, and another container. I picked .253.0 arbitrarily, you should pick something that's not in use in your environment. Also note that the identifier tombstone is nothing special, you can rename it to anything that will help you remember why it's there when you find it again several months later.
Docker will modify your routing table to send traffic for these 4 IPs to go through that new bridge instead of the host network:
# output of route -n
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
0.0.0.0 192.168.5.1 0.0.0.0 UG 0 0 0 eth1
172.17.253.0 0.0.0.0 255.255.255.252 U 0 0 0 br-c48327b0443d
172.20.0.0 0.0.0.0 255.255.0.0 U 0 0 0 docker0
192.168.5.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1
Note: Traffic for 172.17.253.{0,1,2,3} goes through the tombstone docker bridge just created (br-c4832...). Traffic for any other IP in the 172.17.* would go through the default route (host network). My docker bridge (docker0) is on 172.20.0.1, which may appear unusual -- I've modified bip in /etc/docker/daemon.json to do that. See this page for more details.
The twist: if there exists a bridge occupying even a subportion of a /16, new bridges created will skip that range. If we create new docker networks, we can see that the rest of 172.17.0.0/16 is skipped, because the range is not entirely available.
docker network create foo_test
# c9e1b01f70032b1eff08e48bac1d5e2039fdc009635bfe8ef1fd4ca60a6af143
docker network create bar_test
# 7ad5611bfa07bda462740c1dd00c5007a934b7fc77414b529d0ec2613924cc57
The resulting routing table:
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
0.0.0.0 192.168.5.1 0.0.0.0 UG 0 0 0 eth1
172.17.253.0 0.0.0.0 255.255.255.252 U 0 0 0 br-c48327b0443d
172.18.0.0 0.0.0.0 255.255.0.0 U 0 0 0 br-c9e1b01f7003
172.19.0.0 0.0.0.0 255.255.0.0 U 0 0 0 br-7ad5611bfa07
172.20.0.0 0.0.0.0 255.255.0.0 U 0 0 0 docker0
192.168.5.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1
Notice that the rest of the IPs in 172.17.0.0/16 have not been used. The new networks reserved .18. and .19.. Sending traffic to any of your conflicting IPs outside that tombstone network would go via your host network.
You would have to keep that tombstone network around in docker, but not use it in your containers. It's a dummy placeholder network.
Method #2 -- bring down the conflicting bridge network
If you wish to temporarily avoid the IP conflict, you can bring the conflicting docker bridge down using ip: ip link set dev br-xxxxxxx down (where xxxxxx represents the name of the bridge network from route -n or ip link show). This will have the effect of removing the corresponding bridge routing entry in the routing table, without modifying any of the docker metadata.
This is arguably not as good as the method above, because you'd have to bring down the interface possibly every time dockerd starts, and it would interfere with your container networking if there was any container using that bridge.
If method 1 stops working in the future (e.g. because docker tries to be smarter and reuse unused parts of an ip block), you could combine both approaches: e.g. create a large tombstone network with the entire /16, not use it in any container, and then bring its corresponding br-x device down.
Method #3 -- reconfigure your docker bridge to occupy a subportion of the conflicting /16
As a slight variation of the above, you could make the default docker bridge overlap with a region of 172.17.*.* that is not used in your host network. You can change the default docker bridge subnet by changing the bridge ip (i.e. bip key) in /etc/docker/daemon.json (See this page for more details). Just make it a subregion of your /16, e.g. in a /24 or smaller.
I've not tested this, but I presume any new docker network would skip the remainder of 172.17.0.0/16 and allocate an entirely different /16 for each new bridge.