How to bind a Raw Socket to a specific port?
I am currently working on a programming assignment. The assignment is to implement a client,network emulator, and server. The client passes packets to a network emulator, and the network emulator passes to the server. Vice-versa applies as well. The prerequisite for the assignment is that I may only use raw sockets. So I will create my own IP and UDP headers. I have tested my packets with wireshark. They are all correct and in the proper format(it reads them properly).
Another requirement is that the emulator, client and server all have specific ports they must be bound to. Now, I do not understand how to bind a raw socket to a specific port. All my raw sockets receive all traffic on the host address they are bound to. According to man pages, and everywhere else on the internet, including "Unix Network Programming" by Richard Stevens, this is how they are supposed to work. My teacher has not responded to any of my emails and I probably will not be able to ask him until Tuesday.I see two options in front of me. First I can use libpcap to filter from a specific device and then output to my raw socket. I feel this is way out of scope for our assignment though. Or I can filter them after I receive them from the socket. This apparently has a lot of overhead because all the packets are being copied/moved through the kernel. At least, that is my understanding(please feel free to correct me if i'm wrong).
So my question is: Is their an option or something I can set for this? Where the raw socket will bind to a port? Have I missed something obvious?
Thank you for your time.
--
Answer
The man page for raw(7) says:
A raw socket can be bound to a specific local address using the bind(2) call. If it isn't bound all packets with the specified IP protocol are received. In addition a RAW socket can be bound to a specific network device using SO_BINDTODEVICE; see socket(7).
Edit: You cannot bind a raw socket to a specific port because "port" is a concept in TCP and UDP, not IP. Look at the header diagrams for those three protocols and it should become obvious: you are working at a lower level, where the concept of port is not known.