I am new to hardware programming(especially USB) so please bear with me and my questions. I am using C++ and I need to send/receive some data (a byte array) to/from a USB port on a microprocessor board.
Now, I have done some serial port programming before and I know that for a serial port you have to open a port, setup, perform i/o and finally close the port. I am guessing to use a USB port, it is not as simple as what I mentioned above.
I do know that I want to use Microsoft standard drivers and implement standard Windows IO commands to accomplish this, since I believe there are no drivers for the microprocessor board for me to interact with.
If somebody can point me in the right direction as to the steps needed to "talk" to a USB port (open, setup, i/o) via standard Windows IO commands, I would truly and greatly appreciate it. Thanks you so much!!
Answer
USB in a nutshell is excellent background reading.
For a generic USB module try LibUSB which includes some examples of talking to standard devices. LibUSB-Win32 is the windows port of that library.
You're right though, it's nowhere near as simple as an RS232 port.
What microprocessor are you using? Does it come with any USB hardware or are you thinking of trying to implement it all in software (not something I'd recommend even contemplating!). A lot of microprocessors come with code samples which can emulate simple HID USB devices like keyboards / mice etc. which you can use as a starting point. Failing that, there's probably a few off-the-shelf options which will save you a lot of headaches :-)