What is the "FS"/"GS" register intended for?
So I know what the following registers and their uses are supposed to be:
CS = Code Segment (used for IP)
DS = Data Segment (used for MOV)
ES = Destination Segment (used for MOVS, etc.)
SS = Stack Segment (used for SP)
But what are the following registers intended to be used for?
FS = "File Segment"?
GS = ???
Note: I'm not asking about any particular operating system -- I'm asking about what they were intended to be used for by the CPU, if anything.
Answer
There is what they were intended for, and what they are used for by Windows and Linux.
The original intention behind the segment registers was to allow a program to access many different (large) segments of memory that were intended to be independent and part of a persistent virtual store. The idea was taken from the 1966 Multics operating system, that treated files as simply addressable memory segments. No BS "Open file, write record, close file", just "Store this value into that virtual data segment" with dirty page flushing.
Our current 2010 operating systems are a giant step backwards, which is why they are called "Eunuchs". You can only address your process space's single segment, giving a so-called "flat (IMHO dull) address space". The segment registers on the x86-32 machine can still be used for real segment registers, but nobody has bothered (Andy Grove, former Intel president, had a rather famous public fit last century when he figured out after all those Intel engineers spent energy and his money to implement this feature, that nobody was going to use it. Go, Andy!)
AMD in going to 64 bits decided they didn't care if they eliminated Multics as a choice (that's the charitable interpretation; the uncharitable one is they were clueless about Multics) and so disabled the general capability of segment registers in 64 bit mode. There was still a need for threads to access thread local store, and each thread needed a a pointer ... somewhere in the immediately accessible thread state (e.g, in the registers) ... to thread local store. Since Windows and Linux both used FS and GS (thanks Nick for the clarification) for this purpose in the 32 bit version, AMD decided to let the 64 bit segment registers (GS and FS) be used essentially only for this purpose (I think you can make them point anywhere in your process space; dunno if the application code can load them or not). Intel in their panic to not lose market share to AMD on 64 bits, and Andy being retired, decided to just copy AMD's scheme.
It would have been architecturally prettier IMHO to make each thread's memory map have an absolute virtual address (e.g, 0-FFF say) that was its thread local storage (no [segment] register pointer needed!); I did this in an 8 bit OS back in the 1970s and it was extremely handy, like having another big stack of registers to work in.
So, the segment registers are now kind of like your appendix. They serve a vestigial purpose. To our collective loss.
Those that don't know history aren't doomed to repeat it; they're doomed to doing something dumber.