How to send ping using Eclipse Paho MQTT client?
We've just started building our own push notification system (due to client's requirement) for Android and found Eclipse Paho (http://www.eclipse.org/paho/). Needless to say, this project is really exciting.
The problem with Android is, if the CPU is in sleep state, the MQTT client may not get the chance to send ping at its set interval. The workaround is using AlarmManager to wake it up and get the job done. The Android documentation says:
The Alarm Manager holds a CPU wake lock as long as the alarm receiver's onReceive() method is executing. This guarantees that the phone will not sleep until you have finished handling the broadcast. Once onReceive() returns, the Alarm Manager releases this wake lock. This means that the phone will in some cases sleep as soon as your onReceive() method completes.
http://developer.android.com/reference/android/app/AlarmManager.html
I need to be sure that I could send the ping command within that onReceive() method while the CPU has PARTIAL_WAKE_LOCK, so I was searching a way to manually sending ping to server but it seems the client doesn't expose any such method. Am I missing something? Or, what is the workaround here except publishing my own "ping message"? I want to avoid that because of:
- Larger overhead
- We'll ensure that Android clients are subscriber only, may be with Mosquitto's ACL. They will not be allowed to publish messages.
Answer
I've been doing some work with MQTT on Android and I've experienced exactly the same issue.
As Dale says, the old version of the MQTT client used to have an explicit ping() method, but unfortunately this is now hidden away.
The simplest approach, and the one I use, is to explicitly publish a 1 byte message to a particular topic, to serve as the keepalive. I don't think this should add much to the overhead of your application and, while I'm not familiar with Mosquitto's ACL, I assume you could have every client use the same 'keepalive' topic and just provide write access to all. This shouldn't affect security as long as no-one can read from the topic.
An alternative approach would be to have the server send the client(s) a 'keepalive' message at QoS 1 or 2 (pub/sub through a single topic to all for efficiency) as, due to the QoS flows, this will involve the client sending a message back to the server under the covers; which will serve as the keepalive. This has the advantage of keeping your clients as subscriber only; however it's incompatible with 'clean session = false' (as you would have large amounts of messages queued up for delivery to clients who are offline for a while - needlessly affecting performance on reconnect).
Unfortunately these are the only two workarounds that I can currently think of.
Also, as a brief aside, I've experienced a number of issues using the MqttDefaultFilePersistence on Android, so you might want to be aware of this. In particular to do with file locking and problems when re-instantiating the client. To get around this I've created an implementation of MqttClientPersistence built on top of an SQLite database and this is much more robust; you might want to do the same.