Is there an algorithm for color mixing that works like mixing real colors?

Tom Pažourek picture Tom Pažourek · Aug 29, 2009 · Viewed 24.9k times · Source

The common mixing of RGB colors is very different from mixing colors for paintings, it's mixing of light instead mixing of pigments.

For example:

Blue (0,0,255) + Yellow (255,255,0) = Grey (128,128,128)

(It should be Blue + Yellow = Green)

Is there any known algorithm for color mixing that works like mixing real colors?


My approach

I've already tried following:

Converting both colors to HSV and mixing hues (multiplied by coefficient computed from saturation), and a simple average for saturation and value channels. Then I computed average luminance from both colors and adjusted the resulting color to match this luminance. This worked quite well, but the hue mixing was sometimes wrong, e. g.:

Red (Hue 0°) + Blue (Hue 240°) = Green (Hue 120°)

I've figured out that sometimes I need to shift the hue value by 360° (when the difference between hues is greater than 180°).

Red (Hue 360°) + Blue (Hue 240°) = Magenta/fuchsia (Hue 300°)

But this shifting wasn't very good too, e.g.:

Cyan (Hue 179°) + Red (Hue 0°) = Hue 89.5°
Cyan (Hue 181°) + Red (Hue 0°) --> shifting is performed (the difference is greater than 180°)
Cyan (Hue 181°) + Red (Hue 360°) = Hue 270.5°

(Hue 179 + Red) and (Hue 181 + Red) results in two completely different colors.


Then I tried CIE Lab color space (as in Photoshop), which is designed to be closer to how humans perceive the colors.

I used just a simple average for each corresponding two channels, but the results weren't satisfying, for example, I got pink (64, 26, -9.5) out of blue (98, -16, 93) and yellow (30, 68, -112). These coefficients were taken from Photoshop.

Maybe if I used some different operation than average, it could work, but I don't know what.


CMYK didn't work too, results are just like in RGB or LAB.


It seems that neither the trivial additive nor subtractive color mixing in any of these color spaces yields natural results.


Working implementations

Krita – Painterly mixer

Raster graphics editor Krita had a working implementation of more realistic color mixing at some point: http://commit-digest.org/issues/2007-08-12/ (Painterly mixer plugin)

They say it is the first public application that implements special technology using Kubelka and Munk equations that describe the behavior of pigments.

Here's a video of Krita color mixing: https://www.youtube.com/watch?v=lyLPZDVdQiQ

Paper by FiftyThree

There's also article about color blending in the Paper app for iOS developed by FiftyThree. They describe how they innovate and experiment in the area and also offer samples of mixing blue and yellow that results in green. However, the actual process or algorithm isn't really described there.

Quoting:

"In searching for a good blending algorithm, we initially tried interpolating across various color-spaces: RGB, HSV, and HSL, then CieLAB and CieLUV. The results were disappointing," says Chen. "We know red and yellow should yield orange, or that red and blue should make purple—but there isn't any way to arrive at these colors no matter what color-space you use. There's an engineering axiom: Do the simplest thing that could possibly work. Well, we had now tried the easiest possible approaches and they didn't feel even remotely right."

It seems that same as Krita, Paper implements the Kubelka-Munk model:

[...] the Kubelka-Munk model had at least six values for each color, including reflection and absorption values for each of the RGB colors. "While the appearance of a color on a screen can be described in three dimensions, the blending of color actually is happening in a six-dimensional space," explains Georg Petschnigg, FiftyThree's co-founder and CEO. The Kubelka-Munk paper had allowed the team to translate an aesthetic problem into a mathematical framework. [...]

From all this information, it seems that implementation based on the Kubelka-Munk model could be the way forward and offer results that are much closer to reality.

Even though it looks like a complicated process, I haven't yet seen much good information on how to implement something like this.


Related questions

These questions were posted after this one all relating to the same thing.

None of them really has the answer.


Other related links and resources

Answer

RBarryYoung picture RBarryYoung · Aug 29, 2009

The correct answer is NO, because there is no correct working model of how "color mixing in the real world" really works. It is FAR too complex and conditional and not really at all like the simple Red-Blue-Yellow stuff that we learned in school (it in fact requires all of Chemistry and a lot of Physics and Biology to resolve).

However, the simplistic answer is: YES, use subtractive mixing rather than Additive mixing.

The color-mixing that we learned in grade school is based on pigment combinations which are a form of subtractive color mixing (very simplistically). That is the more colors that we add together, the darker it becomes because each pigment subtracts a little bit more light.

On the other hand, almost all computer color-schemes are additive in that they are based on combining light waves (very simplistically), so they get brighter, because each color adds a little bit more light.

The RGB+ scheme is somewhat, the additive complement to the subtractive scheme that we learned in most US elementary schools (which is RBY-). However, they do not match up exactly and it can be difficult to convert between them (researching now ...)


OK, if you just want to switch from additive combinations in RGB to subtractive ones, you can use the following reverse-bayesan type formula to combine two colors:

NewColor.R = (Color1.R * Color2.R)/255
NewColor.G = (Color1.G * Color2.G)/255
NewColor.B = (Color1.B * Color2.B)/255

Adjusting for the difference in the chromatic poles (G to Y, then back to G) is a lot harder ...


It has been pointed out that this produces Black for the example problem, and technically this is correct for a true subtractive system, however, if you want more diluting/subtractive system, you could try this instead:

NewColor.R = 255 - SQRT(((255-Color1.R)^2 + (255-Color2.R)^2)/2)
NewColor.G = 255 - SQRT(((255-Color1.G)^2 + (255-Color2.G)^2)/2)
NewColor.B = 255 - SQRT(((255-Color1.B)^2 + (255-Color2.B)^2)/2)

This produces a dark grey instead of Black. But to get Yellow or anything close, you still have to fix the color-scheme's pole-alignment problem.